ناموجود
-
نقد و بررسی اجمالی
Introduction
XY-AP15H
is a high-power Stereo Bluetooth Audio module. Dual channels audio signal
output. Built-in amplifier module therefore it can connect to loudspeaker
directly. It is ideal for DIY wireless Bluetooth speakers and transponders.
is a high-power Stereo Bluetooth Audio module. Dual channels audio signal
output. Built-in amplifier module therefore it can connect to loudspeaker
directly. It is ideal for DIY wireless Bluetooth speakers and transponders.
It can work with APP Sinilink which can display can monitor the current voice
source and switch Equalizer.
source and switch Equalizer.
Use the power amplifier board as far away as possible from the WIFI signal
(router)
(router)
The recommended supply voltage is DC 8~24V, if it exceeds 26V, the chip will
burn.
burn.
The power supply does not exceed 12V when connected to a 4ￎﾩ speaker and does not exceed 24V
when connected to an 8ￎﾩ speaker
when connected to an 8ￎﾩ speaker
The power supply current is recommended to be above 2A.
The working power of the module exceeds 20W*2, and a heat sink is required
The speaker cable should not be too long and ensure that it is suitable within
1 meter
1 meter
Pay attention to static electricity protection. Discharge the static
electricity on your hands before touching the power amplifier board to prevent
static electricity from breaking down the chip. Bluetooth chips are more
sensitive to static electricity.
electricity on your hands before touching the power amplifier board to prevent
static electricity from breaking down the chip. Bluetooth chips are more
sensitive to static electricity.
It is recommended to adapt the speaker with a rated power of 30W and above to
avoid the speaker from heating and burning
avoid the speaker from heating and burning
Specification
Model:
XY-AP15H
XY-AP15H
Audio input: Bluetooth + AUX+USB flash disk+Computer USB sound card (plug and
play)
play)
Power supply: 8-24V (high power recommended high voltage)
Adapter speaker:30-200Wﾼﾛ4-8ￎﾩ
Channel: left and right(stereo)
Bluetooth version:5.0(>15 meters without occlusion)
Protection mechanism: overvoltage,under-voltage,overheating,DC detection,short
circuit protection
circuit protection
Size: 52*52mm
Output power 10W+10W at 12V 8ohm
Output power 16W+16W at 12V 4ohm
Output power 15W+15W at 16V 8ohm
Output power 20W+20W at 16V 4ohm
Output power 20W+20W at 20V 8ohm
Output power 20W+20W at 20V 4ohm
Instruction
1>.
Choose the right speaker and connect as shown in wiring diagram.
Choose the right speaker and connect as shown in wiring diagram.
2>. Connect to right power supply from input terminal.LED indicator will
flashing and it means that module enters pairing mode.And then speak prompt
voice and it means that module is waiting for pairing.
flashing and it means that module enters pairing mode.And then speak prompt
voice and it means that module is waiting for pairing.
3>. Turn ON Bluetooth in phone.
4>. Select Bluetooth device ‘XinYi’ in your Bluetooth device listing.
5>. LED indicator will keep ON and it means that module is successfully
connected and is waiting for playing.
connected and is waiting for playing.
6>. Module will playing music after select music in phone.LED indicator will
keep slowly blinking.
keep slowly blinking.
7>. Increase or Decrease volume by adjust potentiometer.
8>. Press potentiometer to play or pause music.
Applications
Modified
speaker
speaker
Amplifier equipment
Car Bluetooth device
Package Includes
1pcs
XY-AP15H 15W*2 Bluetooth Amplifier Module
XY-AP15H 15W*2 Bluetooth Amplifier Module
1pcs 6mm knob cap
1pcs DC-005 power adapter
2pcs shell
4pcs M2*11mm Copper column
4pcs M2*3+5mm Copper column
8pcs M2*5mm screw
-
توضیحات کوتاه
ماژول آمپلی فایر صوتی بلوتوث دار 20-10 وات مدل XY-AP15H
