-
نقد و بررسی اجمالی
ماژول مبدل چند کاره USB به I2C/SPI/UART با تراشه CH341A
این
ماژول در واقع یک مبدل چند کاره بر پایه تراشه CH341A می باشد و شما می توانید ارتباط USB به I2C/SPI IIC/UART/TTL/ISP را با استفاده از
این ماژول برقرار نمایید .
Introduction
All
in 1 USB to Serial/I2 C/SPI IIC/UART/TTL/ISP Adapter
in 1 USB to Serial/I2 C/SPI IIC/UART/TTL/ISP Adapter
Support a variety of Serial communication mode
Standard USB type A male design
Support the out output voltage
Specification
High-speed
design, compatible with USB v2.0, USB-A male USB device interface standard;
design, compatible with USB v2.0, USB-A male USB device interface standard;
Direct power supply from USB connectin to PC. Standard analog serial port, for
upgrading original serial peripherals, or older additional serial port via USB;
upgrading original serial peripherals, or older additional serial port via USB;
Supporting 3.3V and 5V TTL lens system, the application series is fully
compatible with the computer under the Windows operating system, without
modification;
compatible with the computer under the Windows operating system, without
modification;
Support 5, 6, 7 or 8 data bits, support ODD parity, even parity, blank and no
parity signs;
parity signs;
Support serial port send control signal and ready signal receiver; Serial Link
signal transmission rate and modem
signal transmission rate and modem
In addition to module level conversion, Support RS232, RS485 and other
interfaces; Two way: EPP parallel port interface (support modules are sold
separately) and Mem way control mode; Parallel USB port can be used for single
digital I/O;
interfaces; Two way: EPP parallel port interface (support modules are sold
separately) and Mem way control mode; Parallel USB port can be used for single
digital I/O;
Support a variety of serial communication mode, UART, I2C, SPI, etc.);
Support 2-wire and 4-wire synchronous serial interface, I2C, support 4 kinds of
baud rate;
baud rate;
Perfectly support STC MCU download and debug program, STC official recommended
program;
program;
Support the out output voltage, 3.3V/5V output) optional or not;
Support working status indication;
Double output interface;
Hardware serial port full-duplex transmission rate, buffer area, support
built-in transceiver communication 50bps~2Mbps. Compatible with Windows
98/ME/2000/XP/Server 2003/Vista/Server 2008/Win 7/8 64/32 bit.
built-in transceiver communication 50bps~2Mbps. Compatible with Windows
98/ME/2000/XP/Server 2003/Vista/Server 2008/Win 7/8 64/32 bit.
Application:
Simulation of standard Serial ports, to update original serial peripherals, or
higher via USB.
higher via USB.
Need I2 C, SPI, UART, TTL serial port and other occasions;
Electronic debugging download engineers;
From a variety of system hardware, software, debugging systems Package
Flash Serial Ports 1PC All in 1 USB to Serial Adapter/I2 C/SPI/IIC///TTL UART
ISP
ISP