آمپرمتر روپانلی دیجیتالی UP5135 5A AC
- برد رزبری پای - RASPBERRY PI
- بردهای کاربردی تحت سیستم عامل
- بردهای کاربردی صنعتی
- تجهیزات الکترونیک
- تجهیزات جانبی
- تغذیه سوئیچینگ صنعتی-آداپتور-منبع تغذیه
- جعبه - کیس های مدار و برد
- دستگاه کنترل پیامک
- ماژول ها
- ISM Band
- LCD
- درایور موتور
- دوربین
- ماژول اثر انگشت
- ماژول دما و رطوبت
- ماژول سنسور گاز
- ماژول های GSM/GPS/GPRS
- ماژول های RFID
- ماژول های آلتراسونیک
- ماژول های بلوتوث
- ماژول های تایمر و پالس
- ماژول های تغذیه و ولتاژ
- ماژول های شبکه و WIFI
- ماژول های شتاب سنج و ژیروسکوپ
- ماژول های صوتی و آمپلی فایر
- ماژول های فرستنده و گیرنده
- ماژول های فشار
- ماژول های مبدل
- ماژول های پزشکی و ضربان قلب
- ماژول های کاربردی
- ماژول پرینتر
- موتورها
- پروگرامرها
- کتاب های آموزشی و کاربردی
- کیت های آموزشی
- بردهای آموزشی ARM , AVR , PIC , FPGA
- روباتیک
- آردوینو
- سنسورها
- LED
- ریموت و کنترل کننده های صنعتی و کاربردی
- آنتن ها
- قطعات پروازی و ربات های پرنده
سبد خرید شما خالی است !
توضیحات محصول
آمپرمتر روپانلی دیجیتالی UP5135 5A AC
ولتاژ تغذیه: 5 ولت DC
جریان قابل اندازه گیری: حداکثر 5 آمپر AC
دقت: 0.2%
مقاومت ایزولاسیون: >100 مگا اهم
Product parameters:
Power Supply: DC: 5V, or AC: 7-12V, or AC: 120V-500Vmeasurement display Frequency range: 50HZ±10% Output voltage:200mv or 600V Output current: 1A or 5A (user specified) Range expansion: with shunt or transformer Power consumption: ≤1.5VA Accuracy: 0.2%±3 characters LED: highlight 0.56 display, one second’s data update Over range indication: 1 or -1Display range: 0-1.999 Overload: for continuous 1.2 times, and for instantaneous: voltage 2 times/5S, current 5 times/5S.Isolation voltage: 2KV/50HZ/1min Insulation resistance: ≥100MΩ Average working time without breakdown: ≥5000HWorking conditions: temperature: -25℃~55℃; relative humidity: ≤93% with no corrosive gas Altitude: ≤2500MTime aging: all the products have been time-aged, so that it can stably work in a long-term to reduce the impact of external environment on the meter, offering users a satisfactory product.
Note:
1. Should be used in the temperature range: -25℃~55℃, humidity: ≤80%, to prevent undesirable phenomena caused by temperature changes.
2. Take care of vibration and shock
3. Do not use it in places with dust, gas and chemicals harmful for electrical products.
4. If the abnormal voltage is caused by the magnetic field, high frequency devices, high voltage spark, lightning and etc, please use the external power line filter or non-linear resistors to interfere and absorb the circuit.
5. The signal input line should be as short as possible, and protective shielding wire should be used in places where there may be interfering signals. It is recommended to use twister pair in general conditions.