ولتمتر روپانلی دیجیتالی UP5135 200V DC
- برد رزبری پای - RASPBERRY PI
- بردهای کاربردی تحت سیستم عامل
- بردهای کاربردی صنعتی
- تجهیزات الکترونیک
- تجهیزات جانبی
- تغذیه سوئیچینگ صنعتی-آداپتور-منبع تغذیه
- جعبه - کیس های مدار و برد
- دستگاه کنترل پیامک
- ماژول ها
- ISM Band
- LCD
- درایور موتور
- دوربین
- ماژول اثر انگشت
- ماژول دما و رطوبت
- ماژول سنسور گاز
- ماژول های GSM/GPS/GPRS
- ماژول های RFID
- ماژول های آلتراسونیک
- ماژول های بلوتوث
- ماژول های تایمر و پالس
- ماژول های تغذیه و ولتاژ
- ماژول های شبکه و WIFI
- ماژول های شتاب سنج و ژیروسکوپ
- ماژول های صوتی و آمپلی فایر
- ماژول های فرستنده و گیرنده
- ماژول های فشار
- ماژول های مبدل
- ماژول های پزشکی و ضربان قلب
- ماژول های کاربردی
- ماژول پرینتر
- موتورها
- پروگرامرها
- کتاب های آموزشی و کاربردی
- کیت های آموزشی
- بردهای آموزشی ARM , AVR , PIC , FPGA
- روباتیک
- آردوینو
- سنسورها
- LED
- ریموت و کنترل کننده های صنعتی و کاربردی
- آنتن ها
- قطعات پروازی و ربات های پرنده
سبد خرید شما خالی است !
توضیحات محصول
ولتمتر روپانلی دیجیتالی UP5135 200V DC
ولتاژ تغذیه: 5 ولت DC
ولتاژ قابل اندازه گیری: حداکثر 200 ولت DC
دقت: 0.2%
مقاومت ایزولاسیون: >100 مگا اهم
Specification
Power Supply: DC: 5V, or AC: 7-12V, or AC: 120V-500Vmeasurement display
Frequency range: 50HZ±10%
Power consumption: ≤1.5VA
Accuracy: 0.2%±3 characters
LED: highlight 0.56 display, one second’s data update
Over range indication: 1 or -1
Display range: 0-1.999
Overload: for continuous 1.2 times, and for instantaneous: voltage 2
times/5S, current 5 times/5S.
Isolation voltage: 2KV/50HZ/1min
Insulation resistance: ≥100MΩ
Average working time without breakdown: ≥5000H
Working conditions: temperature: -25℃~55℃;
relative humidity: ≤93% with no corrosive gas
Altitude: ≤2500M
Time aging: all the products have been time-aged, so that it can stably
work in a long-term to reduce the impact of external environment on the meter,
offering users a satisfactory product.
Note:
1. Should be used in the temperature
range: -25℃~55℃, humidity: ≤80%, to prevent undesirable
phenomena caused by temperature changes.
2. Take care of vibration and shock.
3. Do not use it in places with dust, gas
and chemicals harmful for electrical products.
4. If the abnormal voltage is caused by
the magnetic field, high frequency devices, high voltage spark, lightning and
etc, please use the external power line filter or non-linear resistors to
interfere and absorb the circuit.
5. The signal input line should be as
short as possible, and protective shielding wire should be used in places where
there may be interfering signals. It is recommended to use twister pair in
general conditions.